Showers normally fall into 3 types and the shower door you select mainly depends on the design. There are bath tub showers, walk-in enclosures located in a corner and alcove stand-alone stalls.
A 4th type, barrier-free showers, is a subset of alcove showers or corner showers. This kind of installation has a doorless style with a modern look. It can likewise supply a seamless entry to improve availability for wheelchairs.
In addition to the type of shower enclosure you have, you'll need to consider the restroom's layout, the dimensions of the opening and the offered area around the shower to determine the instructions in which the door opens.
Bypass or Sliding Doors
Bypass or sliding shower doors are a common option for a little bathroom or tub showers.
- Consist of 2 and sometimes three panels that move along each other on tracks
- Sliding door operation requires no floor space for opening door
- Ideal for large openings, with a typical opening of 60-inches wide
- Some models are created for alcove walk-in showers
Pivot or Hinged Doors
Hinged shower doors swing open from a single side on corner or alcove walk-ins.
- Ideal for openings that are too narrow to accommodate a bypass door
- Can be integrated with inline fixed panels in broad alcove enclosures
- Some designs have hinges to permit door to swing both inward and outward
Round Doors
Round shower doors are a space-saving option for corner walk-in shower stalls.
- Ideal for corner standalone showers
- Often reversible for best or left gain access to
- Open by slider or style can have a bypass operation or hinged opening
- Curved glass style reduces the shower's footprint in the bathroom
- Attached to the top and bottom of the frame for stability and smooth operation
Neo-Angle Doors
Neo-angle doors are designed to fit neo-angle shower enclosures for corner setups.
- Take up less flooring space than a rectangle design
- Some designs have reversible doors for left or best entry
Barrier-Free
Barrier-free showers have a fixed door panel near the shower head.
- Fixed door panel guards spray from the restroom floor, but no door at the opposite end
- Design can make a bathroom feel larger and modern-day
- Opening is typically broader than traditional shower doors, offering easier gain access to for those who require it
Measurements and Measuring
Precise measuring is essential to guarantee a correct suitable for your shower door.
Most brand-new shower doors can be changed a little to fit a series of openings and accommodate walls that aren't completely square. Nevertheless, the door you pick need to really closely match both the width and height of your Kauai Glass Companies shower's opening.
Tip: If the enclosure area is new, do not take any measurements until the shower is complete and the walls are finished. Material on the wall, such as backerboard and tile, can reduce the wall-to-wall width by as much as 1-inch on each side.
Follow these actions for accurate measuring:
- Measure the opening width. Figure out the distance from wall to wall at the top and bottom of the opening. The measurements must be to the nearby 1/16- inch. If these differ, choose a door using the larger width for a bypass door or the smaller sized width for a pivot door.
- Measure the opening height. Determine the range from the top of the tub edge or shower base to the top of the wall system or tile wall where you want the door to be situated. Measure vertically at both sides. The measurement ought to be to the nearby 1/16-inch. Select a door with a height less than or equal to the smallest of these measurements.
Idea: Single panel doors are hardly ever wider than 36-inches broad. For bigger openings, pair a door with a stationary inline panel.
If you are thinking about a hinged door, make certain that the door has space to swing open without striking any obstructions. Extend a measuring tape to the width of the door. Hold one end of the tape where the door hinge will be located and pivot the other end to ensure there is clearance for opening.
Frame Design
Shower doors are framed or frameless.
Framed doors
- Have aluminum, stainless-steel or composite product framing the glass panel
- Include a track that collects and traps water, needing regular cleaning
- Framed pivot shower doors just open outward
- A range of finishes are available to complement your decor
Frameless doors
- Have a more recent design style with through-the-glass mounted hardware and different densities of glass
- Easier to keep clean
- Create a sensation of spaciousness
- Frameless pivot doors often can open in or out
Glass
The density of the glass in your shower door is dependent on structural and style aspects, such as whether the door is framed or frameless. Glass thickness isn't a concern for framed doors since the glass is protected in a metal frame. Usually, the thicker and much heavier the glass is, the more stable and smoother gliding the door will be.
Clear glass shower doors showcase tile and stonework in the shower and can make the small area of your restroom feel bigger.
Frosted, textured or patterned glass shower doors use differing levels of personal privacy and can add a stylish element to the bathroom.
Pacific Mirror & Glass LLC is Kauai's Glass Shop for Mirrors, Shower Enclosures, Storefront Glass, Glass Railings, Sliding Patio Doors and more.
For more information contact:
Pacific Mirror & Glass LLC
5675 Kawaihau Rd Ste B2
Kapaa, HI 96746
(808) 635-9696
https://www.pacificmirrorandglass.com/