Showers usually fall into 3 types and the shower door you select mainly depends on the style. There are bathtub showers, walk-in enclosures found in a corner and alcove stand-alone stalls.
A 4th type, barrier-free showers, is a subset of alcove showers or corner showers. This type of setup has a doorless style with a contemporary look. It can likewise provide a seamless entry to boost accessibility for wheelchairs.
In addition to the type of shower enclosure you have, you'll require to think about the bathroom's layout, the measurements of the opening and the readily available space around the shower to identify the instructions in which the door opens.
Bypass or Sliding Doors
Bypass or moving shower doors are a typical solution for a small restroom or bath tub showers.
- Consist of two and in some cases 3 panels that slide along each other on tracks
- Sliding door operation requires no flooring area for opening door
- Ideal for wide openings, with a common opening of 60-inches large
- Some designs are created for alcove walk-in showers
Pivot or Hinged Doors
Hinged shower doors swing open from a single side on corner or alcove walk-ins.
- Ideal for openings that are too narrow to accommodate a bypass door
- Can be integrated with inline fixed panels in broad alcove enclosures
- Some designs have hinges to permit door to swing both inward and external
Round Doors
Round shower doors are a space-saving option for corner walk-in shower stalls.
- Ideal for corner standalone showers
- Often reversible for best or left access
- Open by slider or style can have a bypass operation or hinged opening
- Curved glass style reduces the shower's footprint in the bathroom
- Attached to the top and bottom of the frame for stability and smooth operation
Neo-Angle Doors
Neo-angle doors are developed to fit neo-angle shower enclosures for corner installations.
- Take up less flooring area than a rectangular shape style
- Some designs have reversible doors for left or right entry
Barrier-Free
Barrier-free showers have a fixed door panel near the shower head.
- Fixed door panel shields spray from the bathroom floor, but no door at the opposite end
- Design can make a bathroom feel bigger and contemporary
- Opening is frequently larger than traditional shower doors, supplying much easier gain access to for those who require it
Measurements and Measuring
Precise measuring is essential to ensure a proper fit for your shower door.
Many new shower doors can be adjusted slightly to fit a variety of openings and accommodate walls that aren't perfectly square. Even so, the door you select ought to very closely match both the width and height of your shower's opening.
Tip: If the enclosure area is new, do not take any measurements until the shower is total and the walls are ended up. Product on the wall, such as backerboard and tile, can minimize the wall-to-wall width by as much as 1-inch on each side.
Follow these actions for accurate measuring:
- Measure the opening width. Figure out the distance from wall to wall at the top and bottom of the opening. The measurements should be to the closest 1/16- inch. If these vary, select a door utilizing the bigger width for a bypass door or the smaller width for a pivot door.
Identify the range from the top of the tub edge or shower base to the top of the wall unit or tile wall where you want the door to be situated. Select a door with a height less than or equal to the smallest of these measurements.
Idea: Single panel doors are rarely larger than 36-inches broad. For bigger openings, pair a door with a stationary inline panel.
If you are thinking about a hinged door, be sure that the door has room to swing open without striking any blockages. Extend a tape measure to the width of the door. Hold one end of the tape where the door hinge will be located and pivot the other end to guarantee there is clearance for opening.
Frame Design
Shower doors are framed or frameless.
Framed doors
- Have aluminum, stainless-steel or composite material framing the glass panel
- Include a track that collects and traps water, needing routine cleaning
- Framed pivot shower doors only open outside
- A range of finishes are offered to match your decoration
Frameless doors
- Have a more recent design style with through-the-glass installed hardware and different thicknesses of glass
- Easier to keep clean
- Create a feeling of go to website spaciousness
- Frameless pivot doors frequently can open in or out
Glass
The density of the glass in your shower door depends on structural and style aspects, such as whether the door is framed or frameless. Glass density isn't a concern for framed doors because the glass is secured in a metal frame. Generally, the thicker and heavier the glass is, the more stable and smoother gliding the door will be.
Clear glass shower doors showcase tile and stonework in the shower and can make the small space of your bathroom feel larger.
Frosted, textured or patterned glass shower doors provide varying levels of privacy and can add a trendy aspect to the bathroom.
Pacific Mirror & Glass LLC is Kauai's Glass Shop for Mirrors, Shower Enclosures, Storefront Glass, Glass Railings, Sliding Patio Doors and more.
For more information contact:
Pacific Mirror & Glass LLC
5675 Kawaihau Rd Ste B2
Kapaa, HI 96746
(808) 635-9696
https://www.pacificmirrorandglass.com/