Showers usually fall into 3 types and the shower door you choose mainly depends upon the design. There are bathtub showers, walk-in enclosures located in a corner and alcove stand-alone stalls.
A 4th type, barrier-free showers, is a subset of alcove showers or corner showers. This kind of setup has a doorless design with a contemporary look. It can also offer a smooth entry to improve accessibility for wheelchairs.
In addition to the kind of shower enclosure you have, you'll need to consider the restroom's layout, the measurements of the opening and the available space around the shower to determine the instructions in which the door opens.
Bypass or Sliding Doors
Bypass or moving shower doors are a typical service for a little bathroom or tub showers.
- Consist of 2 and sometimes three panels that slide along each other on tracks
- Sliding door operation needs no floor space for opening door
- Ideal for broad openings, with a normal opening of 60-inches wide
- Some models are developed for alcove walk-in showers
Pivot or Hinged Doors
Hinged shower doors swing open from a single side on corner or alcove walk-ins.
- Ideal for openings that are too narrow to accommodate a bypass door
- Can be integrated with inline repaired panels in large alcove enclosures
- Some models have hinges to enable door to swing both inward and external
Round Doors
Round shower doors are a space-saving choice for corner walk-in shower stalls.
- Ideal for corner standalone showers
- Often reversible for ideal or left access
- Open by slider or design can have a bypass operation or hinged opening
- Curved glass design lowers the shower's footprint in the bathroom
- Attached to the top and bottom of the frame for stability and smooth operation
Neo-Angle Doors
Neo-angle doors are created to fit neo-angle shower enclosures for corner installations.
- Take up less floor space than a rectangle style
- Some models have reversible doors for left or best entry
Barrier-Free
Barrier-free showers have a set door panel near the shower head.
- Fixed door panel shields spray from the bathroom floor, however no door at the opposite end
- Design can make a restroom feel bigger and modern
- Opening is frequently wider than standard shower doors, offering simpler access for those who require it
Measurements and Measuring
Precise measuring is essential to make sure a proper fit for your shower door.
The majority of brand-new shower doors can be adjusted slightly to fit a series of openings and accommodate walls that aren't completely square. However, the door you select should really carefully match both the width and height of your shower's opening.
Tip: If the enclosure area is new, do not take any measurements till the shower is total and the walls are finished. Product on the wall, such as backerboard and tile, can lower the wall-to-wall width by as much as 1-inch on each side.
Follow these actions for precise measuring:
- Measure the opening width. If these vary, choose a door using the bigger width for a bypass door or the smaller width for a pivot door.
Determine the range from the top of the tub edge or shower base to the top of the wall system or tile wall where you desire the door to be located. Select a door with a height less than or equivalent to the smallest of these measurements.
Idea: Single panel doors are rarely larger than 36-inches wide. For bigger openings, set a door with a stationary inline panel.
If you are thinking about a hinged door, make certain that the door has room to swing open without hitting any blockages. Extend a measuring tape to the Mirrors Kauai width of the door. Hold one end of the tape where the door hinge will be located and pivot the other end to guarantee there is clearance for opening.
Frame Design
Shower doors are framed or frameless.
Framed doors
- Have aluminum, stainless-steel or composite product framing the glass panel
- Include a track that collects and traps water, requiring regular cleansing
- Framed pivot shower doors just open outward
- A variety of finishes are readily available to match your decor
Frameless doors
- Have a newer design style with through-the-glass mounted hardware and different densities of glass
- Easier to keep tidy
- Create a sensation of spaciousness
- Frameless pivot doors typically can open in or out
Glass
The density of the glass in your shower door is dependent on structural and design elements, such as whether the door is framed or frameless. Glass thickness isn't a problem for framed doors due to the fact that the glass is protected in a metal frame. Usually, the thicker and heavier the glass is, the more steady and smoother gliding the door will be.
Clear glass shower doors showcase tile and stonework in the shower and can make the little area of your restroom feel bigger.
Frosted, textured or patterned glass shower doors use differing levels of personal privacy and can include a trendy aspect to the bathroom.
Pacific Mirror & Glass LLC is Kauai's Glass Shop for Mirrors, Shower Enclosures, Storefront Glass, Glass Railings, Sliding Patio Doors and more.
For more information contact:
Pacific Mirror & Glass LLC
5675 Kawaihau Rd Ste B2
Kapaa, HI 96746
(808) 635-9696
https://www.pacificmirrorandglass.com/